TJ-HB160SP-KB3000SP Large Blow Molding Machine

Configuration

Clamping system

Diagonal double tie bar center clamping bi-directional synchronous high precision linear guideway clamping device

Extrusion system

AC speed control + Hardened face gear reducer

Die system

Special steel center-feeding die

Hydraulic system

All imported hydraulic valve +hydraulic servo control system

Control system

Imported PLC + Europe imported complete machine control system (GEFRAN from Italy )

Tongjia TJ-HB160/SP-KB3000/SP series large blow molding machines are mainly designed and developed for special-shaped hollow products. This series machine can be special made according to customers’ different requirements. It is used in the production include automobile air ducts, fuel tanks, urea tanks for vehicles, plastic water horses, anti-collision buckets, pole anti-collision buckets, fences and other transportation facilities, water surface floating balls, sea floating, environmental protection floating and other plastics floating, various panels, various fences, etc.

Commodity name： TJ-HB160SP-KB3000SP Large Blow Molding Machine

Subcategory

Plastic Blow Molding Machine

Contact information

keyword

Product details

Parameters
Specifications	Units	TJ-HB160SP	TJ-KB1000SP3	TJ-KB1000SP6	T J-KB2000SP	T J-KB3000SP2
Material		HDPE	HDPE	HDPE	HDPE	HDPE
Die quantity	Set	1	1	1	1	1
Machine dimension	M	6 8x4.0x5.0	9.1x5.6x6.3	9.1x5.6x6.3	10.6x7.1x8.0	10.6x7.1x8.0
Machine weight	Ton	23	35	42	48	48
Die-head
Accumulatorcapacity	L	12.8/20/30	30	40	50-60	50-60
Max.diameter of die	mm	400/500/650	650	750	750/860	750/860
Die head heating power	KW	33/45/54	54	58	60/64	60/64
Die head heating zone quantity	zone	3/415	5	5	6	6
Clamping Unit
Clamping force	KN	660	1000	1000	2400	2400
Distance between platens	mm	700-1500	900-2200	900-2200	700-2200	700-2200
Mold platen size	mm	1100X1400	1400X1600	1400X1900	1400X2800	1400X3200
Extruder unit
Screw diameter	mm	100	135	150	150	135X2
Screw L/D ratio	L/D	30	32	30	30	32
HMWHDPE plasticizing amount	Kg/h	380	400	500	500	400x2
Screw heating zone quantity	zone	6	6	6	6	6x2
Screw heating power	KW	36	41	64	64	41x2
Extruder driving power	KW	132	160	200	200	160X2
Power
Total power consumption	KW	275-285	334	397-436	465-504	600-660
Hydraulic drive power	KW	45 + 7.5	45 + 7.5	45 + 7.5	65+7.5	37 + 24 + 7.5
Cooling water consumption	m3/h	30	40	40	45	50
Cooling water pressure	Mpa	0 3-0.6	0 3-0.6	0 3-0.6	0 3-0.6	0 3-0.6
Air pressure	Mpa	1	1	1	1	1
Air consumption	m3/min	3	3	4	5	5

Recommended Product

Full Automatic CO2 XPS Physical Foamed Board Production Line

The XPS extruded polystyrene foam insulation board machine from Shandong Tongjia uses PS polystyrene particles as the main raw material, which are heated and melted by an extruder. The process incorporates environmentally friendly physical foaming agents under high pressure to create a uniform, lightweight foam board.

Ecomomy CO2 XPS Foamed Board Production Line

The XPS production line manufactures thermal insulation boards from polystyrene and a foaming agent through high-temperature extrusion. Traditionally, HCFC foaming agents were used, but due to their ozone-depleting potential, their use is being gradually restricted under the Montreal Protocol. In response, Shandong Tongjia Machinery Co., Ltd. has developed CO2-based extruded board equipment, replacing HCFC with CO2. This fully fluorine-free foaming process sets a new standard for eco-friendly XPS production.

Fully automatic new EVA solar film machine(Roller type)

The fully automatic EVA solar film production line has the characteristics of efficient production, low manual intervention, and automatic monitoring during the production process. It can help manufacturers improve production efficiency, reduce production costs, and provide high-quality solar panels. The production line uses advanced automation technology, and each link from EVA pretreatment to cutting and collection is automated, which greatly improves production efficiency. Compared with traditional manual operations, this production line can minimize the intervention of operators, reduce the influence of human factors, and improve the reliability and stability of production. The production line is equipped with various sensors and monitoring devices, which can automatically monitor each link in the production process to ensure the accuracy and consistency of production. High precision: The production line uses professional cutting equipment and automatic control systems to achieve high-precision cutting and collection. The production line uses high-quality materials and processes to produce high-quality, stable performance, environmentally friendly and pollution-free solar panel films.

TJ-HB30L-120L Blow Molding Machine

Tongjia TJ-HB30L-120L blow molding machine is single-station with accumulator type die head. It is mainly used to produce various chemical barrels, civilian barrels, medical packaging, child safety seats, transportation facilities and tool box, etc. It can meet different customer requirements for 30-120L hollow products of different specifications need. According to customers’ need we can produce it as multi-layer machine and adjust machine part. This machine control system adopts imported PLC+ European imported complete machine control system. Hydraulic system adopts fully imported hydraulic valve + hydraulic servo control system.